Savior® Wall-Mounted Firearm Rack for 6 Rifles

The Savior Wall-Mounted Firearm Rack provides organized storage for up to 6 rifles or shotguns. Its upper and lower sections are installed separately, allowing their spacing to be adjusted to the length of the stored firearms. When properly anchored to structural wall components, the powder-coated steel rack has a manufacturer-specified load capacity of up to 150 lb / 68 kg.

Adjustable Spacing for Different Firearm Lengths

The upper barrel support and lower stock rest are mounted independently. Their vertical spacing can therefore be selected according to the length of the stored rifles or shotguns. The lower rest extends far enough from the wall to provide clearance for most conventional riflescopes.

Rubber-Coated Contact Points

The support prongs feature a rubber coating that reduces direct contact between the firearms and the steel frame, helping protect their finish from scratches. A powder-coated surface provides the steel frame with additional resistance to wear.

Secure Wall Installation

Each mounting plate features 2 installation holes, with the mounting points spaced 16 in / 40.6 cm apart. The rack must be secured to structural studs or another suitably solid part of the wall. The manufacturer specifically advises against installation into drywall alone. Mounting screws are included, but the anchoring method and hardware must always be appropriate for the wall material.

Load Capacity up to 150 lb

The manufacturer specifies a maximum load capacity of 150 lb / 68 kg when the rack is installed correctly and anchored to a sufficiently strong structure. The rack must be mounted level, and the manufacturer recommends using a spirit level during installation. Improper or uneven installation may reduce its ability to support the stored firearms safely.

Key Benefits:

• wall-mounted storage for up to 6 long guns
• suitable for rifles and shotguns
• separate upper and lower sections
• adjustable spacing for different firearm lengths
• lower rest provides clearance for most conventional riflescopes
• rubber-coated support prongs
• powder-coated steel frame
• 2 installation holes in each mounting plate
• mounting points spaced 16 in / 40.6 cm apart
• mounting screws included
• load capacity of up to 150 lb / 68 kg when properly anchored
• space-saving wall-mounted design