Poly Triad is a lightweight tactical LED flashlight from the ASP Duty Series line. Meets the security forces standards. The frame is made of lightweight aluminium and the body itself from a very light yet sturdy polymer. The flashlight emits sharp white light of unbelievable brightness.
The light turns on with a tail switch complemented with a twist selector to switch the modes. This selector features three positions – constant-on (rotate right), flashing (rotate left) and locked (middle). So the twist selector midifies the function of the tail switch. Poly Triad is equipped with a premium Cree XPG2 LED diode and emits light in two intensity rates - high and low. The frame as well as the parabolic reflector from an aluminium alloy provide the flashlight with a good heat conductivity.
On the body of the flashlight on both its ends you find machined grooves to attach an attachment clip. The Snap-Loc clip is removable and can be placed in either of these grooves to adjust the position of a carried flashlight. It can be carried lens up or down. You can also use it without the clip carried inside your pocket, backpack and so on.
Poly Triad works great in cold weather. Its polymer body ensures a comfortable grip even in adverse conditions. The vinyl foam handle surface makes your grip sure and provides insulation.
The light is easy to charge using your laptop and the supplied retractable cable plugged into the laptop USB port or powerbank. You can also use any compatible mobile phone charger (e.g. BlackBerry, Motorola, Nokia, Samsung, etc.). You can as well purchase a car charger or a classic ASP power grid charger. You will see the charging status thanks to an indicator flashing red when the battery is depleted or shines green, when the battery is charged. The micro USB port and charging indicator are located under the releasable ring behind the light's head. In emergency situations you can also use two CR123 batteries (no effect on charging circuit).
Total length | 17,5 cm |
Afterglow | 250 m |
Weight | 150 g |
Material | Aluminium Polymer RX18 |