





The Direct Action Vanguard Over-Shell Jacket is a waterproof tactical shell designed for rapid deployment over a plate carrier, chest rig, or other load-bearing equipment. Its three-layer laminate protects against rain and wind while allowing internally generated moisture to escape. Expandable rear panels accommodate a plate carrier with an attached back panel, while long underarm zippers provide adjustable ventilation. The helmet-compatible hood offers sufficient room for mounted accessories.
The three-layer laminate provides a waterproof rating of 25,000 mm and breathability of 15,000 g/m²/24 h. It protects against heavy rain and wind while allowing water vapor to pass through the fabric during physical activity.
The cut accommodates a plate carrier, chest rig, or tactical belt worn underneath. Expandable rear panels provide additional room for carriers equipped with an attached back panel. Snap fasteners at the upper chest and waist help stabilize the jacket and reduce unwanted movement over the equipment.
A quick-opening front zipper allows the jacket to be removed rapidly when required. Because the zipper itself is not waterproof, it is covered by a protective storm flap that helps prevent water from entering through the front closure. The jacket can also be worn without load-bearing equipment as a conventional waterproof outer layer.
Long underarm vents with waterproof zippers allow excess heat to escape during strenuous activity. The openings can be adjusted to suit the current workload and weather conditions without removing the jacket or the equipment worn underneath.
The hood fits over a tactical helmet equipped with accessories such as hearing protection, night vision devices, a battery pack, or a helmet-mounted light. Three-way adjustment controls its circumference and depth for use with or without a helmet, while the reinforced brim helps shield the face from rain.
The jacket has four pockets, including two pass-through openings that provide access to pockets or equipment worn underneath. This preserves access to essential gear after the waterproof layer has been donned. Hook-and-loop cuff tabs allow the sleeves to be adjusted around the wrists, gloves, or other equipment.


