Cobalt Kinetics® AR-15 Pro Series 13.7" self-loading rifle / caliber .223 Rem.

The Cobalt Kinetics Pro series weapons were designed not only to meet the requirements for professional use by armed forces but to exceed these requirements in every aspect. The semi-automatic AR-15 Pro Series 13.7" / caliber .223 Rem. from Cobalt Kinetics is constructed to reliably operate in the most adverse environments and conditions while remaining a refined tool.

Unique design and refined details

During the design phase, critical factors such as accuracy, recoil mitigation, operation, and ambidextrous controls were considered. The final result is an elegant solution that demonstrates what correct design and meticulous attention to detail can provide.

Indestructible construction

The semi-automatic AR-15 Pro Series 13.7" / caliber .223 Rem. from Cobalt Kinetics features both an upper and lower receiver and a handguard made from 7075-T6 aluminum. The barrel nut is longer than the conventional AR15 nuts. The handguard is attached to the extended upper receiver using a four-point mounting system. This provides the weapon with incredible stiffness and robustness. The weapon is equipped with a low-profile gas block and a free-floating barrel from Rosco Manufacturing.

Bolt carrier assembly like no other

The bolt carrier assembly used in the AR-15 Pro Series 13.7" / caliber .223 Rem. from Cobalt Kinetics is made from a durable steel bolt carrier. The surface finish is done with black nitriding. The assembly is designed for use with 5.56×45 mm NATO and .300 Blackout ammunition. The gaskey adheres to Mil-Spec standards for reliability. At Cobalt Kinetics, great attention is paid to the production of the bolt carrier assembly. The entire assembly is made according to the highest standards and meets strict quality control limits.

Cobalt RCB 2.0 flash suppressor

This self-loading rifle is equipped with the Cobalt RCB 2.0 flash suppressor. Cobalt Kinetics sought a solution to excessive side gas blowout in brakes with large ports. They achieved this by designing a port system that optimizes gas dispersion. This solution allows better control of muzzle rise, enabling faster successive shots. The device effectively suppresses excessive muzzle flashes.

Minimal recoil

High attention was paid to details such as material selection, surface finish and production tolerances to ensure the best possible outcome for your needs and significantly reduce recoil.

Radian Raptor LT charging handle

The AR-15 Pro Series 13.7" / caliber .223 Rem. from Cobalt Kinetics is equipped with a Radian Raptor LT charging handle. This charging handle uses patented ambidextrous functions like its predecessor. The handle is made from hard-anodized aluminum. The handle levers are then over-molded with a high-strength, glass-reinforced polymer for maximum strength, weight and durability.

Geissele trigger

The self-loading AR-15 Pro Series 13.7" / caliber .223 Rem. from Cobalt Kinetics features the top-notch Geissele G2S trigger from the same company. The Geissele G2S trigger was designed as a high-quality yet affordable alternative to the Geissele SSA trigger, with the main difference being the hammer retention method. It is a reliable two-stage trigger with a resistance of around two kilograms. The G2S ensures precise and good control over the firing.

And it's still not all

The semi-automatic AR-15 Cobalt Kinetics is equipped with a B5 Systems Bravo stock and a buffer tube from Vltor with 5 positions, allowing the user to adjust the rifle's length to their preferences. The Cobalt Kinetics Pro Buffer is adjustable, which is advantageous for tuning the weapon's behavior. The B5 Systems Type 23 P-Grip handle enhances comfort and shooting control.

Benefits you need to know about:

• B5 Systems stock
• ambidextrous safety
• Cobalt RCB 2.0 flash suppressor
• Vltor buffer tube with five positions
• fully adjustable Cobalt Kinetics Pro Buffer
• Radian Raptor LT charging handle
• two-stage Geissele G2S trigger