Peli™ Storm Case® iM2750 durable waterproof case with foam

€ 570,84

Product code: IM2750-00001

Warranty length: 2 years

Storm Case is a product line of very high-quality and durable, nearly indestructible cases from Peli Products, S.L.U. Specifically, the case iM2750 boasts a lightweight and strong construction, made from special HPX resin.

Buckle closure

The Peli Storm Case iM2750 has a closure with a total of 4 buckles, all of which can be closed with one hand, further simplifying handling of the case. The case is lockable and equipped with two hasps for a padlock. Its transportation is eased by 3 comfortable dual-layer handles with a rubber grip on the underside, a telescopic handle or 2 wheels for easy transport.

Robust design

Overall, this case is very robust – it is equipped with highly durable hinges and is additionally watertight, dustproof and impact resistant. Sealing is achieved using an O-ring. The luggage meets (among other things) military standards MIL-STD-810F, FED-STD-101C and ATA 300. It can withstand extreme temperatures ranging from -29°C to +60°C. We must also mention the Vortex pressure equalization valve. This variant of the case comes with internal foam padding.

Benefits you need to know about:

ideal case for transporting weapons
lightweight yet strong construction
made from special HPX resin
4 large lockable buckles with a safety catch, operable with one hand
watertight, dustproof and impact resistant
robust hinges
3 comfortable dual-layer handles with rubber grip and soft handle
1 telescopic handle
2 wheels for easier transport
lockable, 2 hasps for a padlock
automatic Vortex pressure equalization valve
strong and tear-resistant foam padding
certified / meets standards MIL-STD-810F, FED-STD-101C and ATA 300

Optional accessories (not included):

spare foam padding
organizer with adjustable dividers
basic equipment for attaching a mounting frame to the case
open lid holder
manual pressure equalization valve
organizer for the case lid

Do you like the product?

Buy Peli™ Storm Case® iM2750 durable waterproof case with foam at a special price € 570,84

Important parameters

Height / length	62,5 cm
Width	50 cm
Depth	36,6 cm
Volume	77,9 l
Material in detail	Case body: injection-molded HPX® resin O-rings: synthetic elastomer EPDM (Ethylene Propylene Diene Monomer) Foam: polyester Valve: Gore-Tex® membrane
Dimensions in detail	Internal dimensions: 55.9cm × 43.2cm × 32.3cm Internal depth of the case without the lid: 27.2cm Internal lid depth: 5.1cm Overall internal depth of the case: 32.3cm Padlok hole diameter: 0.8cm
Weight in detail	Empty case: 8.4kg Case with foam: 10.6kg
Fixing / transport	1 comfortable double-layer handle on the long side with a soft rubber grip 2 comfortable double-layer handles with soft rubber grip (1 on each short side - for two-handed carrying) Telescopic handle on the short side and 2 wheels on the opposite side
Other specifications	Very durable Sturdy hinges Waterproof Dustproof Shockproof Closure: 4 large buckles / latches - 2 on the long side and 1 on each short side - operable with one hand Lockable: 2 openings / hasps for a padlock on the long side (at the edges next to the buckles) --- Vortex™ automatic pressure valve Operating temperature: -29°C to +60°C Buoyancy (ability to stay afloat on water surface): max 78.7kg Protection: IP67 - tested content protection against dust and water ingress according to EN 60529 standard (dustproof + withstands immersion to a depth of 1m for 30 minutes) Made in USA
Parts of delivery	Case Protective foam - 8 layers: 1) corrugated foam with a thickness of 5.1cm for the lid 2) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 3) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 4) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 5) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 6) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 7) pick & pluck foam with a thickness of 4.3cm with a grid of pre-cut blocks / squares measuring approximately 1.3cm × 1.3cm 8) full foam with a thickness of 1.6cm for the bottom of the case

Tutorials and files to download Certificate Product list

Product inquiry

Enter your name *

Enter your e-mail address *

I agree with terms and conditions

Do you like the product?

Buy Peli™ Storm Case® iM2750 durable waterproof case with foam at a special price € 570,84

Product category

Variants

Doručení do České republiky? Přejděte na Odolný vodotěsný kufr Peli™ Storm Case® iM2750 s pěnou

Doručenie na Slovensko? Prejdite na Odolný vodotesný kufor Peli™ Storm Case® iM2750 s penou

97% of goods in stock

Money back guarantee

Brick-and-mortar stores

Our customers have a brick-and-mortar store in Semily, about 40 km from Liberec, in Olomouc and Ostrava. We also deliver goods to Slovakia on Rigad.sk and also to the whole of Europe and practically the whole world on Rigad.com.

Purchase information

About the company

Shop

Thanks to the satisfaction of verified customers, the Rigad.cz shop has received the prestigious Gold Verified by Customers certificate.

NCAGE 828DG

Peli™ Storm Case® iM2750 durable waterproof case with foam

Buckle closure

Robust design

Benefits you need to know about:

Optional accessories (not included):

Product inquiry

Product category

Variants

Peli™ Storm Case® iM2750 durable waterproof case with foam - Olive Green

Peli™ Storm Case® iM2750 durable waterproof case with foam - Black

Peli™ Storm Case® iM2750 durable waterproof case with foam - Yellow