An optic sitting well above the rail, plus a raised accessory platform on the Hydra. GBRS Group mounts have a distinctive profile and a specific design brief. They create clearance around the optic and accommodate gear that affects head position. Their height also changes the geometry of the entire setup. We introduce the American brand, explain the differences between Hydra, Lerna, and FTC, and break down what the 2.91-inch figure means.
GBRS stands for Global Battlefield Research Solutions. The American company describes itself as veteran-owned and, according to its company profile, was founded in 2019. Its work combines training, sharing experience, and equipment development.
Its founders include DJ Shipley and Cole Fackler. Both served 17 years in the U.S. Navy, with assignments to SEAL Team 10 and Naval Special Warfare Development Group. That experience forms the foundation of the brand’s approach to product design and training.

Hydra combines a tall optic mount with a forward Picatinny platform for additional accessories. Here, it carries a red dot sight and a laser module.
GBRS’s lineup extends beyond optic mounts. It also includes other gear and apparel. The company produces educational content and offers physical training through its Human Performance program, led by coach Vernon Griffith. Long-term personal development and mental health also feature in its messaging.
Optic placement affects the position of the shooter’s eye and head relative to the firearm. With its tall mounts, GBRSfollows a concept it calls heads-up. The elevated optic is intended to allow a more upright head position.
Much of the rationale comes down to accommodating other gear. A helmet, communications headset, protective mask, or night vision device changes the space available around the head and optic. GBRS cites these constraints as factors behind its design.
Mount height is just one factor in firearm ergonomics. Stock design, optic choice, other gear, and the shooter’s build all play a part. A higher optic position will suit some shooters better than others.

GBRS Group combines equipment development with training and physical conditioning. The brand was founded by U.S. Navy SEAL veterans whose service experience informs its product designs.
The Hydra combines an optic mount with a raised forward platform featuring a MIL-STD-1913 rail, commonly known as Picatinny. This platform accommodates additional compatible accessories.
The design addresses both primary optic height and the placement of other devices. GBRS emphasizes its use on weapon platforms with limited rail space. Moving accessories to a different height creates more options for arranging equipment within that limited space.
Rigad currently carries the Hydra V2. This generation is available in several versions for different optic mounting interfaces.
The 6061-T6 aluminum body has a hard-anodized finish. Color options include black and FDE.
Lerna follows the same basic principle of raising the optic. Its design focuses on the optic itself and omits the Hydra’s forward platform.
The main difference is what each system accommodates. Hydra provides a platform for additional accessories, while Lerna serves as a standalone tall optic mount. The 6061-T6 aluminum body has a hard-anodized finish. Like the Hydra V2, it’s available in black and FDE.
Lerna comes in several versions, including models for the Aimpoint Micro T-2, Aimpoint ACRO, EOTech XPS and EXPS, and Trijicon MRO. Each version has a corresponding mounting interface, so the choice depends on the specific optic model.
The GBRS Group 2.91 FTC Magnifier Mount series adds magnifier mounting options to the system. FTC stands for Flip-to-Center. When stowed, the magnifier sits below the optical centerline and stays within the receiver’s footprint, rather than folding out to the side of the firearm.
UNITY Tactical designs and manufactures the series. The mounts use a Force-to-Overcome mechanism and attach to the rail with a quick-detach (QD) lever.
The manufacturer offers two main versions.
OMNI indicates broader compatibility within a defined range of magnifiers. The exact magnifier model remains a key detail when specifying the setup.
| System | Primary Function | Key Design Feature |
|---|---|---|
| Hydra | Mounting an optic and additional accessories | Raised forward Picatinny platform |
| Lerna | Mounting an optic alone | Omits the Hydra’s forward platform |
| 2.91 FTC | Mounting a magnifier | Flip-to-Center mechanism, available in OMNI and 30MM versions |
GBRS specifies an optical centerline height of 2.91 inches, approximately 73.9 mm, above the top surface of the mounting rail for these systems. The mount’s overall height is a separate measurement.
Mechanical offset is the distance between the optical centerline and the bore axis. It also depends on the rail’s position relative to the barrel, and therefore on the firearm’s design. The same optic height above the rail can produce different mechanical offsets on different firearms.
An optic’s brand alone doesn’t establish compatibility. The exact model, mounting interface, and mount version all matter. For example, GBRS offers separate versions for the EOTech XPS and EXPS.
The same distinction matters with magnifiers. The manufacturer’s compatibility list for the FTC OMNI includes the Holosun HM3X and HM3XT, among other models.

This side view shows the red dot sight and the Hydra’s forward platform elevated above the rifle’s rail. The mount version must match the optic’s mounting interface.
Michal Baka is a longtime Hydra user. We plan to follow this introduction to the brand and its mounts with a more detailed look at practical experience with them.
Any meaningful assessment needs to account for the specific setup, including the firearm, optic, magnifier if fitted, and other gear. Their arrangement determines how GBRS’s approach to optic height works for each user.
▶️ Watch the GBRS drill on Rigad’s YouTube channel.
Lukáš and Michal introduce a series of GBRS shooting drills. Their opening discussion also covers protective masks, night vision, and the idea of comparing different mount heights in a future practical test.
GBRS Group draws on its founders’ experience in both training and equipment design. Its tall mounts share a focus on clearance around the optic and how the setup works with other gear. Hydra adds a forward platform, Lerna focuses on mounting the optic alone, and FTC handles the magnifier.
There’s more to the complete setup than the 2.91-inch specification. The specific mounting interfaces, firearm design, and distinction between height above the rail and mechanical offset also matter. Understanding these relationships explains GBRS’s tall mounts better than a photo alone.
▶️ Watch Rigad’s introduction to GBRS Group mounts on YouTube.

