





The Nitecore EDC35 is a high-performance compact EDC flashlight designed for everyday carry, outdoor activities, and emergency use. Combining extreme output, long runtime, and intuitive operation, it delivers up to 5000 lumens with a maximum beam distance of approximately 550 meters.
The flashlight utilizes the high-performance NiteLab UHi 40 MAX LED and offers multiple illumination modes for different operational scenarios. Dedicated rapid-access functions include Search mode with 3000 lumens and the high-intensity Lumin Shield mode delivering up to 5000 lumens for maximum situational awareness and area illumination.
The rear tactical switch enables intuitive one-handed operation and rapid output adjustment under dynamic conditions.
The integrated 6000 mAh battery is rechargeable via a USB-C port protected by a rotating cover for improved environmental resistance. In the lowest output mode, the flashlight provides up to 90 hours of runtime.
Additional features include a battery status indicator and dual lockout modes to prevent accidental activation during transport or pocket carry.
The compact low-profile body is optimized for comfortable everyday carry in a pocket, pouch, or load-bearing equipment. The rugged construction meets IP68 standards for water and dust resistance and offers impact resistance for drops from heights up to 2 meters.
Measured in accordance with the ANSI FL 1 standard under laboratory conditions using the integrated rechargeable Nitecore® 21700 Li-ion battery with a capacity of 6 000 mAh at a specified temperature and humidity. Values may vary depending on ambient conditions or how the flashlight is used (a different power source cannot be used).
| Mode | Luminous flux (lm) | Beam distance (m) | Runtime on a full charge | Luminous intensity (cd) |
| Ultralow | 5 | 27 | 90 h | 190 |
| Low | 70 | 100 | 40 h | 2 500 |
| Mid | 300 | 200 | 9 h 15 min | 10 600 |
| High | 1 300 | 230 | 4 h 45 min | 13 300 |
| Search | 3 000 | 550 | - | 75 700 |
| Lumin Shield™ | 5 000 | 500 | - | 62 500 |
| Total length | 12,5 cm |
| Number of modes | 6 |
| Types of batteries / accumulators | Built-in Li-ion battery Nitecore® 21700, capacity 6,000 mAh, voltage 3.6 V, energy 21.6 Wh, energy density 296 mWh/g, energy capacity corresponds to approximately 6 CR123A batteries |
| Material in detail | Body: military-grade 7075-T6 aluminum alloy |
| Surface finish | Body: military-grade Type III hard-coat anodizing |
| Dimensions in detail | Body diameter: 2.6 cm Head diameter: 3.2 cm |
| Weight in detail | Without clip: 171 g With clip: 179 g |
| Other specifications | Number of LEDs: 1 white LED type: NiteLab® UHi 40 MAX – 1 large LED with 8 auxiliary cores (specially developed next-generation LED) Optical lens with a scratch-resistant coating on both sides Available modes: white light at various output levels – Ultralow / Low / Mid / High / Search / Lumin Shield Beam pattern: Lumin Shield – wide flood beam / Search – narrow spot beam Maximum output: 5,000 lm Maximum range: 550 m Maximum light duration: 90 h Maximum luminous intensity: 75,700 cd Highly efficient constant-current circuit provides stable output APC (Advanced Power Cut-Off) technology for ultra-low standby power consumption Advanced Temperature Regulation (ATR) technology (Patent No. ZL201510534543.6) Optical sensor protection – in High mode, the flashlight automatically reduces output to 300 lm when an obstruction is detected in front of the lens to prevent overheating; once the obstruction is removed, the original output is restored Intelligent charging circuit USB Type-C charging port at the tail of the flashlight (behind the Rapid Lock™ sliding control), protected by a rotating cover against dust and mechanical damage Battery status indication (4 green LEDs = 4 charge levels of 25%) Charging time: approx. 3 hours 30 minutes using a 5 V/2 A adapter Controls: 1 tactical tail switch Lockout function prevents accidental activation; Rapid Lock™ sliding control – unlocked / partial lockout (Search and Lumin Shield modes available) / full lockout Strike bezel shaped to provide enhanced protection for the flashlight head and for emergency use, such as breaking glass Removable DCP (Deep Carry Pocket) clip for deeper, more discreet pocket carry Flat tailcap allows the flashlight to stand upright Ingress protection: IP68 (dust-tight and withstands immersion in water up to 2 m deep; duration not specified by the manufacturer) Impact resistance: drops from up to 2 m |
| Parts of delivery | Flashlight Built-in battery USB Type-C charging cable 550 paracord safety lanyard with carabiner Removable clip Case |
| Normy, standardy a certifikace | ANSI FL 1 – measurement of performance parameters and impact resistance EN 60529:1991 – classification of degrees of protection against ingress of dust and water (IP rating) |


