Lansky® 4 - Stone Deluxe Diamond System Sharpening Kit

The kit features: 

• extrav coarse silver hone (70 grit) for re-profiling the bevel grind 
• coarse purple hone (120 grit) for reconditioning of extremely damaged edges 
• medium orange hone (280 grit) for sharpening and less frequent touch-ups 
• fine gold hone (600 grit) for frequent touch-ups to keep your blade paper-slicing sharp

Note: because diamond sharpeners are made of metal plate coated with mone-crystalline diamond, the hone will wear over the time and will need to be replaced. How soon it may happen depends on how often is being used, the hardness of the steel and the amount of pressure during sharpening process. because a diamond hone has a shorter life cycle tha other sharpeners, we suggest using just the weight of your hand when sharpening. 

Warning: Never use honing oil on the diamond hones as it may clog the pores of diamond surface, resulting in a smooth surface and therefore unfunctionality.Included honing oil is intended for use with other sharpeners, that can be purchased extra. 

Pro-tip: When you are trying to "remove" steel from the blade, use coarser diamond hone and finish with your fine hone (diamond, ceramic or tungsten carbide).

Sharpening Angles 

Also available 

Instructions for use when using Lansky kit 

• insert the guide rod into the hone 
• make sure that the rod is in line with the sharpening surface 
• if needed, bend the rod slightly 
• secure the knife into the included clamp, tighten the clamp with the front screw, the knife is secured with a red fixing screw
• set the angle - to the same one pre-established 
• you can hold it in a hand or clamp for extra safety/or use special Lansky stand 
• always sharpen into the blade, DO NOT sharpen along the length of the blade or away from the blade 
repeat sharpening on the other side 
• reepat approx 60 times for each side
• when the sharpener is accumulated with any metallic burrs – clean it with honing oil and fine cloth or paper towel 
• start with the coarsest hone and work your way down to the finest – the one you start with depending on condition (the duller edge the coarser grit) 
• for sharpening serrations the special serrated hones are used 
• set the angle - to the same one pre-established 
place the edge of the serrated hone into the serrations and push the hone against the edge 
• for larger serrations use rolling motion 
• repeat approx 46 times for each serration
• to remove any small steel particles accumulated on the flat side gently run the flat side of the hone up and down over the length of the blade several times. 

Benefits you need to know about:

• sharpening kit – set of professional knife sharpeners 
• for all types of knives 
• for regular blades 
• fast and easy sharpening 
• metal plate coated with mone-crystalline diamond
• ergonomic plastic body for secure grip  
• 4 diamond hones 
  • extra coarse silver 
  • coarse purple 
  • medium orange 
  • fine gold 
• 4 guide rods 
• honing oil 
• multi-angle clamp  
• extra long knife clamps for thicker blades 
• multi-lingual instructions
• storage/carry case 
• made in the USA