
Fibertec Textile Guard RT Spray-On is an eco-friendly waterproofing treatment designed to protect functional clothing and outdoor gear. It is suitable for membrane and synthetic materials such as Gore-Tex, Sympatex, Texapore, HyVent, Ceplex, Dermizax, and more.
This spray-on treatment restores durable water repellency (DWR), creating a protective barrier against moisture while maintaining breathability and without altering the fabric’s color. It activates at room temperature, eliminating the need for tumble drying or ironing.
The water-based formulation uses advanced polymer technology and is fully biodegradable. It contains no fluorocarbons (PFC-free), or microplastics, and complies with bluesign standards for environmentally responsible textile processing.
Apply the product evenly by spraying onto clean, dry or slightly damp material, then allow it to air dry. No additional heat treatment is required.
| Volume | 500 ml |
| Material in detail | Bottle: 100% recycled plastic (R-HDPE) Spray nozzle: PP / PE |
| Other specifications | Waterproofing treatment for technical and membrane fabrics Suitable for GORE-TEX® and other waterproof/breathable membrane fabrics, including hardshell and softshell jackets Optimizes the breathability of technical fabrics Free from microplastics Biodegradable polymer-based active ingredient Powerful water-repellent effect Base: water Waterproofing treatment activation: allow to dry at room temperature; heat activation is not required Approximate amount required: 120–150 ml for one size L hardshell or softshell jacket Coverage: 500 ml is sufficient for approx. 4–5 garments Vegan – contains no animal-derived ingredients Classification under Regulation (EC) No 1272/2008 (CLP): not classified as hazardous |
| Normy, standardy a certifikace | Regulation (EC) No 648/2004 – sets requirements for the biodegradability of surfactants bluesign® APPROVED – meets bluesign® system requirements for safer chemical composition, health protection, and reduced environmental impact from manufacturing |
| Upozornění | Keep out of reach of children Use only outdoors or in well-ventilated areas Do not inhale aerosol |
| Země původu | Germany |
| Údržba | Before use, check the fabric manufacturer’s care instructions and, if necessary, test on an inconspicuous area Shake well before use Spray evenly onto clean, dry or damp fabric, work it in with a sponge or cloth, and allow to dry Allow to dry on a wide hanger at room temperature (approx. 20 °C) Drying time: 12 h to 24 h Tips: Wash the garment before applying the waterproofing treatment; otherwise, dirt may become set in the fabric It is recommended to wash the garment with Pro Wash before applying the waterproofing treatment to prevent reactions with detergent residues Spread the product evenly to prevent staining When hanging the garment to dry, place cardboard or similar material underneath it |