
Fibertec® Textile Guard Pro Spray-On is a high-performance waterproofing treatment designed to protect functional clothing and outdoor gear. It is suitable for synthetic and membrane fabrics such as Gore-Tex®, BlocVent®, and other technical textiles, helping restore durable water repellency while protecting against dirt and grease.
The treatment forms a durable barrier that repels water, grease, and everyday dirt without reducing fabric breathability or altering its color. It is ideal for maintaining the performance of technical garments in demanding conditions.
The formula uses next-generation C6 fluorocarbon technology, offering an effective balance between performance and environmental responsibility. It is free from PFOA and PFOS and is not bioaccumulative. The formulation meets bluesign® standards.
For maximum effectiveness, the treatment requires heat activation—either in a tumble dryer or by ironing at a low temperature—to fully develop its water-repellent properties.
| Volume | 500 ml |
| Material in detail | Bottle: 100% recycled plastic (R-HDPE) Spray head: PP / PE |
| Other specifications | Waterproofing treatment for technical and membrane fabrics Suitable for GORE-TEX® and other waterproof/breathable membrane fabrics, including hardshell and softshell jackets Maintains and optimizes breathability Free from microplastics Powerful water-repellent effect; repels dirt, oil, and grease Base: water-based Waterproofing treatment activation: allow to dry at room temperature; heat activation is not required. For best results, tumble dry at 60 °C, provided this is permitted by the garment manufacturer’s care instructions.
Approximate amount required: 100–120 ml for one size L hardshell jacket / 120–150 ml for one size Leierzeichnis Coverage: 500 ml is sufficient for approx. 4–5 garments Vegan – contains no animal-derived ingredients Classification under Regulation (EC) No 1272/2008 (CLP): not classified as hazardous |
| Upozornění | Keep out of reach of children Use only outdoors or in a well-ventilated area Do not breathe aerosol spray |
| Země původu | Germany |
| Údržba | Shake well before use Spray evenly onto clean, damp fabric, work it in with a sponge or cloth, and allow to dry. Leave freshly washed fabric to drip for approx. 10 minutes. If it has already dried, lightly dampen it before applying the waterproofing treatment. Drying time: 12 h to 24 h Tips: Wash the garment before applying the waterproofing treatment; otherwise, dirt may become set in the fabric.
Spread the product evenly to prevent staining When hanging the garment to dry, place cardboard or similar material underneath it |