Broadhead Arrow Sharpener/Wrench Lansky®

This broadhead sharpener is safe, simple and compact tool, that allows fast work of three different tasks - broadhead tightening/replacement and sharpens broadheads. Can be also used to touch up knives. Broadhead is an indispensable helper for every hunter/shooter. Sharpening angles are pre-set at 22,5° to achieve 45° angle.

Instructions for use 

Sharpener

Step 1 - grip the sharpener, fingers inside the guard, thumb resting against the thumb guard 
Step 2 - place the knife on a solid, flat surface cutting edge up, let about 1/2 of the blade extend beyond the edge of the surface (for example table); hold the knife steady with one hand and begin tio sharpen with the other
Step 3 - place the "V" in the head of the quick edge sharpener; hold the sharpener at roughly 90° to the blade – greater angle would result in poor sharpening performance– draw the sharpener towards the tip of the blade; tungsten carbide sharpener grudually removes metal from the blade, making it sharp; repeat 3 to 4 times, applying light pressure; repeat on all broadhead blades 

Step 4 – clean the blade thoroughly 

Same use for both right and left-handers. 

Wrench 

To remove broadhead - place broadhead into the wrench located at the top of the sharpener and then twist arrow anti-clockwise.  
To attach broadhead - place broadhead in wrench, bring arrow to threads and twist arrow clockwise 

Note: Read the instructions before use. Do not rush and pay attention to what you do. Knife sharpening is an inherently dangerous activity - if you use this sharpener properly you can not be hurt but a careless handling or pointed objects can hurt you.

Benefits you need to know about : 

• wrench for tightening / replacement of broadheads
• sharpens broadheads and regular knives 
• fast and simple use
• high-quality plastic 
• tungsten carbide sharpener 
  
• ergonomic handle  
• finger and thumb guard 
• compact 
• easy to store 
• lightweight 
• sharpening angles are pre-set at 22,5° to achieve 45° angle